Message

  • 2018-04-16 05:53:23 André Oliveira

    Good evening, I would like to know how to trigger the RMA from a GAMEMAX GM600 source, I bought it at the end of the year 2017, and today it presented instability problems, with small short ones, restarting and even turning itself off in some moments, I ask Your help to solve the best possible

    thanks for using our products, and you'd contact with the shop where you buy, i believe they will give you right answer for provide you services.
  • 2018-04-16 03:13:40 Dominic

    Hello, I recently purchased an Onyx case however on getting it home I noticed one of the thumbscrews used to secure the tempered glass case was missing. Is it possible to order one (or more if needed)? I have looked at aone.co.uk but it showed no results for thumbscrews at all. Kind regards, Dominic

    Sorry for this inconvience, you'd ask the shop where you bought if possible to provide you buffer screws.
  • 2018-04-16 01:54:12 Fredy

    Hi,i bought gamemax power supply gp-550 It is good, but i want to conect it with mid-end vga Before i do that, i want to make sure it is okay or not, because i dont find the certificate of gp-550 in plugloadsolutions.com site Please tell me when the certificafe is out? Thank you

    Thanks for choose our products, the detailed info is email replied.
  • 2018-04-09 16:47:08 Patrick Noble

    Good Morning, I have purchased an M908 GameMax Abyss case from Ebuyer.com. The instructions show cleaning of a PSU intake filter, but no such filter was included in the package, is it available separately? Also, one of the RGB LED/s in the RGB strip in the infinity mirror has lost the Red from the RGB (so off completely when red, shows blue when white, green when yellow, etc). Can the tempered galss be removed to replace the RGB strip? Your help will be much appreciated.

    it is PSU position filter as deault, and Pls connect or exchange RGB strip channel on PCB controller, maybe it is caused by loose connection.
  • 2018-04-08 17:05:48 Josh

    Good morning, I have recently purchased the GameMax Nexus RGB Case in White. However I can only get two colours (Red and Blue) from the RGB switch on top of the case. Plus the back fan LED does not turn on either. I have it plugged in o a chassis fan header on the motherboard. I have tried plugging everything out and back in again and I have tried a different chassis fan header. What do you reckon the issue is please?

    thanks for use our products, it has been replied to you by email.
  • 2018-04-08 04:02:10 Kelli

    Hi, I recently brought my boyfriend the Onyx midi case with RGB fans. I also purchased the Gamemax RGB case light SL-18M. The problem I am having is that I can not get the strip light to work. I have plugged it in to the lighting control panel at the back of the case in the LED 4pin slot but it is still not working. Can you please help?

    Pls contact with www.aone.co.uk, they can help you for find solution
  • 2018-04-08 00:36:01 victor alexandre

    I bought the mouse Game Max Hurricane Gaming Mouse but I do not think the software to download can send me a link to download it

    Pls contact with www.aone.co.uk for download it
  • 2018-04-06 06:15:26 Graeme

    I have a kallis pc case. I/m unsure about how to set up the fan controller. 1. Does the PWM (6) go to the cpu_fan port on the mother board. 2. I have two fans each with 4 pins on my CPU heatsink. Where should I plug them in?

    PWM cable to motherboard's chassis fan (4pin) , if you CPU headtick has 2 fan(in 4pin), there is a 2in1 cable? so that you can save a 4pin PWM connector onboard
  • 2018-04-03 01:50:50 Thomas

    Hi there, I have recently purchased the onyx case and it looks fantastic, however, the fans require a male molex in o the controller to power them and I have no male molex only female molex available from my power supply. I have searched the web for hours to try and find a gender changer, to no avail. Can you please advise?

    if you are coming from UK? if yes, Pls order it from www.aone.co.uk
  • 2018-03-30 15:06:23 Matthew

    Hi , I have Gamemax Vega case which has RGB LEDs on it but the LEDs are not working , could you please help me how to fix it , or give me step-by-step guid , thanks .

    http://www.gamemaxpc.com/downloaddocu/showdownload.php?lang=en&id=24 pls ref. to the manual 1) first, the PWM+RGB controller board (fit on rear of chassis), to be connect with power(FDD direct connect or via morex 4pin to fdd adapter cable 2) Link fan's connector and RGB connect on PCB controller in well 3) Push side RGB switch (on face panel), the RGB leds will changed lighting mode.
PgUp1234567...8PgDn Go to
Changer Code

About GAMEMAX

GAMEMAX brand products of computer case and power supply were very popular among computer game players, become a reliable best brand in IT gaming accessories provider in worldwide!

About us more

News Tip

Contact Us

  • Dongguan City Guandong Province
  • 400-998-1698
  • info@gamemaxpc.com
  • www.gamemaxpc.com