GameMax Infinity multi-ARGB fan GMX-12ARGB-L, with Inner and Outer light, and center with infinity depth light effects.
PWM 4pin link to motherboard Chassis fan socket, for auto speed control, and with additional 4pin male connector for linking more fans in Series connection.
ARGB 3pin Male/Female connector, supports standard addressable RGB leds ,Asus Aura and it can extend to link more fans via the series connection.
Anti-noise design by optimized fan blade and there are rubber gaskets on the fan corner
GameMax big bowl fan GMX-12-RBB side luminous band GameMax- playability< br/>
The fan blade can be disassembled, which is convenient for dust removal --- functional< br/>
The bowl-shaped design has large wind pressure; the Suspended fan blade design, with large air volume 58.8cfm (the fan blade is larger than the traditional aperture fan), and the air pressure is 2.18
The sickle design matches the suspended fan blade, which increases the air intake volume from the side. The traditional fan can only supply air from the front, which increases the air intake volume
Optimize use big motor has lower dynamic balance, longer service life, and quieter sound
The ultra-thin design is 20% lower than the traditional fan. The cold exhaust installed with our fan can be compatible with the high vest memory module in the market without interference< br/>
The expandable fan cover is practical and beautiful, which can better conform to the spirit of DIY and improve the overall effect after installation
Gamemax Airforce AF12X 12CM FRGB PC Cooling FAN
120mm fan with Molex + 3-Pin connector, featuring a stylish Fixed RGB LED Lighting design to add an extra flair to your rig. Comes equipped with curved fan blades for increased air pressure, maximizing cooling performance and minimizing air resistance and noise.
Fixed RGB LED Lighting adds extra flair to your rig,4xColors mixed lights to light up your chassis
Curved fan blades for maximum cooling performance, increase airflows for improving system performance
The fan speed of 1200 RPM with 38.25CFM, is for reducing noise and keeping your PC in silent as possible.
GameMax FN12-S5-W, 120mm White frame Fan - High-Performance Cooling Fan for PC Case
⚡【Intelligent Speed Control】120mm fans. The intelligent temperature controls the speed at 800~1600±10% RPM, by linking to the motherboard PWM 4pin socket, so the fan speed auto controlled and keeps the fans quiet.<br/>
⚡【Shockproof Design】The fan frame is fixed on both sides with 8 pieces of shock-absorbing rubber pads. The rubber soft material which is not easy to peel off has a good shock-absorbing effect, which can make the internal operation of the computer case stable and reduce the noise output between the fan and the computer case. The maximum noise of the fan is only 30dBA.
<br/>
GameMax FN12-S5, 120mm Black frame Fan - High-Performance Cooling Fan for PC Case
⚡【Intelligent Speed Control】120mm fans. The intelligent temperature controls the speed at 800~1600±10% RPM, by linking to the motherboard PWM 4pin socket, so the fan speed auto controlled and keeps the fans quiet.<br/>
⚡【Shockproof Design】The fan frame is fixed on both sides with 8 pieces of shock-absorbing rubber pads. The rubber soft material which is not easy to peel off has a good shock-absorbing effect, which can make the internal operation of the computer case stable and reduce the noise output between the fan and the computer case. The maximum noise of the fan is only 30dBA.
<br/>
GameMax FN14A-S5-W, 120mm White frame ARGB Fan - High-Performance Cooling Fan for PC Case
⚡【Intelligent Speed Control】120mm full function ARGB PWM fans. The intelligent temperature controls the speed at 800~1600±10% RPM, by linking to the motherboard PWM 4pin socket, so the fan speed auto controlled and keeps the fans quiet.
⚡【Inner And Outer Light】Addressable RGB LEDs can be controlled by ARGB remote controller, Multiple ARGB light modes and speeds, provide colorful streamer lighting effects. creating a practical and beautiful cooling system. You also can turn on / off the fan light effect and switch the fan hub's ARGB signal to the motherboard 5V ARGB port by AURA Sync Mode.
⚡【Shockproof Design】The fan frame is fixed on both sides with 8 pieces of shock-absorbing rubber pads. The rubber soft material which is not easy to peel off has a good shock-absorbing effect, which can make the internal operation of the computer case stable and reduce the noise output between the fan and the computer case. The maximum noise of the fan is only 30dBA.
GameMax FN14A-S5, 120mm White frame ARGB Fan - High-Performance Cooling Fan for PC Case
⚡【Intelligent Speed Control】120mm full function ARGB PWM fans. The intelligent temperature controls the speed at 800~1600±10% RPM, by linking to the motherboard PWM 4pin socket, so the fan speed auto controlled and keeps the fans quiet.
⚡【Inner And Outer Light】Addressable RGB LEDs can be controlled by ARGB remote controller, Multiple ARGB light modes and speeds, provide colorful streamer lighting effects. creating a practical and beautiful cooling system. You also can turn on / off the fan light effect and switch the fan hub's ARGB signal to the motherboard 5V ARGB port by AURA Sync Mode.
⚡【Shockproof Design】The fan frame is fixed on both sides with 8 pieces of shock-absorbing rubber pads. The rubber soft material which is not easy to peel off has a good shock-absorbing effect, which can make the internal operation of the computer case stable and reduce the noise output between the fan and the computer case. The maximum noise of the fan is only 30dBA.
GameMax FN12A-S5-W, 120mm White frame ARGB Fan - High-Performance Cooling Fan for PC Case
⚡【Intelligent Speed Control】120mm full function ARGB PWM fans. The intelligent temperature controls the speed at 800~1600±10% RPM, by linking to the motherboard PWM 4pin socket, so the fan speed auto controlled and keeps the fans quiet.
⚡【Inner And Outer Light】Addressable RGB LEDs can be controlled by ARGB remote controller, Multiple ARGB light modes and speeds, provide colorful streamer lighting effects. creating a practical and beautiful cooling system. You also can turn on / off the fan light effect and switch the fan hub's ARGB signal to the motherboard 5V ARGB port by AURA Sync Mode.
⚡【Shockproof Design】The fan frame is fixed on both sides with 8 pieces of shock-absorbing rubber pads. The rubber soft material which is not easy to peel off has a good shock-absorbing effect, which can make the internal operation of the computer case stable and reduce the noise output between the fan and the computer case. The maximum noise of the fan is only 30dBA.
GameMax FN12A-S5, 120mm Black frame ARGB Fan - High-Performance Cooling Fan for PC Case
⚡【Intelligent Speed Control】120mm full function ARGB PWM fans. The intelligent temperature controls the speed at 800~1600±10% RPM, by linking to the motherboard PWM 4pin socket, so the fan speed auto controlled and keeps the fans quiet.
⚡【Inner And Outer Light】Addressable RGB LEDs can be controlled by ARGB remote controller, Multiple ARGB light modes and speeds, provide colorful streamer lighting effects. creating a practical and beautiful cooling system. You also can turn on / off the fan light effect and switch the fan hub's ARGB signal to the motherboard 5V ARGB port by AURA Sync Mode.
⚡【Shockproof Design】The fan frame is fixed on both sides with 8 pieces of shock-absorbing rubber pads. The rubber soft material which is not easy to peel off has a good shock-absorbing effect, which can make the internal operation of the computer case stable and reduce the noise output between the fan and the computer case. The maximum noise of the fan is only 30dBA.
GameMax FN12A-S8I-RW, Reverse 120mm White frame ARGB Fan -Reverse Fan Blade for Power Supply Shroud /Bottom plate of Case for Air Intakes!
⚡【Intelligent Speed Control】120mm full function ARGB PWM fans. The intelligent temperature controls the speed at 800~1600±10% RPM, by linking to the motherboard PWM 4pin socket, so the fan speed auto controlled and keeps the fans quiet. These fans are 3pin 5v ARGB connectors that connect with ARGB control HUB one by one.
⚡【Inner And Outer Light】Addressable RGB LEDs can be controlled by ARGB remote controller, Multiple ARGB light modes and speeds, provide colorful streamer lighting effects. creating a practical and beautiful cooling system. You also can turn on / off the fan light effect and switch the fan hub's ARGB signal to the motherboard 5V ARGB port by AURA Sync Mode.
⚡【Shockproof Design】The fan frame is fixed on both sides with 8 pieces of shock-absorbing rubber pads. The rubber soft material which is not easy to peel off has a good shock-absorbing effect, which can make the internal operation of the computer case stable and reduce the noise output between the fan and the computer case. The maximum noise of the fan is only 31.21dBA.
⚡【Reverse Blade of Fan】 Reverse Fan Blade for Power Supply Shroud /Bottom plate of Case for Air Intakes, to additional increase airflow from bottom to vertical chassis design type.
GameMax FN12A-S8I-R, Reverse 120mm Black frame ARGB Fan -Reverse Fan Blade for Power Supply Shroud /Bottom plate of Case for Air Intakes!
⚡【Intelligent Speed Control】120mm full function ARGB PWM fans. The intelligent temperature controls the speed at 800~1600±10% RPM, by linking to the motherboard PWM 4pin socket, so the fan speed auto controlled and keeps the fans quiet. These fans are 3pin 5v ARGB connectors that connect with ARGB control HUB one by one.
⚡【Inner And Outer Light】Addressable RGB LEDs can be controlled by ARGB remote controller, Multiple ARGB light modes and speeds, provide colorful streamer lighting effects. creating a practical and beautiful cooling system. You also can turn on / off the fan light effect and switch the fan hub's ARGB signal to the motherboard 5V ARGB port by AURA Sync Mode.
⚡【Shockproof Design】The fan frame is fixed on both sides with 8 pieces of shock-absorbing rubber pads. The rubber soft material which is not easy to peel off has a good shock-absorbing effect, which can make the internal operation of the computer case stable and reduce the noise output between the fan and the computer case. The maximum noise of the fan is only 31.21dBA.
⚡【Reverse Blade of Fan】 Reverse Fan Blade for Power Supply Shroud /Bottom plate of Case for Air Intakes, to additional increase airflow from bottom to vertical chassis design type.
GameMax FN12A-S8I-W, 120mm White frame ARGB Fan - High-Performance Cooling Fan for PC Case
⚡【Intelligent Speed Control】120mm full function ARGB PWM fans. The intelligent temperature controls the speed at 800~1600±10% RPM, by linking to the motherboard PWM 4pin socket, so the fan speed auto controlled and keeps the fans quiet. These fans are 3pin 5v ARGB connectors that connect with ARGB control HUB one by one.
⚡【Inner And Outer Light】Addressable RGB LEDs can be controlled by ARGB remote controller, Multiple ARGB light modes and speeds, provide colorful streamer lighting effects. creating a practical and beautiful cooling system. You also can turn on / off the fan light effect and switch the fan hub's ARGB signal to the motherboard 5V ARGB port by AURA Sync Mode.
⚡【Shockproof Design】The fan frame is fixed on both sides with 8 pieces of shock-absorbing rubber pads. The rubber soft material which is not easy to peel off has a good shock-absorbing effect, which can make the internal operation of the computer case stable and reduce the noise output between the fan and the computer case. The maximum noise of the fan is only 31.21dBA.
GameMax FN12A-S8I, 120mm Black frame ARGB Fan - High-Performance Cooling Fan for PC Case
⚡【Intelligent Speed Control】120mm full function ARGB PWM fans. The intelligent temperature controls the speed at 800~1600±10% RPM, by linking to the motherboard PWM 4pin socket, so the fan speed auto controlled and keeps the fans quiet. These fans are 3pin 5v ARGB connectors that connect with ARGB control HUB one by one.
⚡【Inner And Outer Light】Addressable RGB LEDs can be controlled by ARGB remote controller, Multiple ARGB light modes and speeds, provide colorful streamer lighting effects. creating a practical and beautiful cooling system. You also can turn on / off the fan light effect and switch the fan hub's ARGB signal to the motherboard 5V ARGB port by AURA Sync Mode.
⚡【Shockproof Design】The fan frame is fixed on both sides with 8 pieces of shock-absorbing rubber pads. The rubber soft material which is not easy to peel off has a good shock-absorbing effect, which can make the internal operation of the computer case stable and reduce the noise output between the fan and the computer case. The maximum noise of the fan is only 31.21dBA.
GameMax FN12A-S2I-RW, Reverse 120mm White frame ARGB Fan-Reverse Fan Blade for Power Supply Shroud /Bottom plate of Case for Air Intakes!
⚡ Infinity mirror look all around.
⚡ 120mm full function ARGB PWM fan. The intelligent temperature controls the speed at 800~1600±10% RPM, by linking to the motherboard PWM 4pin socket, so the fan speed auto controlled and keeps the fans quiet.
⚡ Embedded magnetic Fluid Dynamic Bearing to provide stability, durability, and longevity.
⚡ 24 LEDs in each fan,Center 8pcs, Outer ringg 16pcs.
⚡【Reverse Blade of Fan】 Reverse Fan Blade for Power Supply Shroud /Bottom plate of Case for Air Intakes, to additional increase airflow from bottom to vertical chassis design type.
GameMax FN12A-S2I-R, Reverse 120mm Black frame ARGB Fan-Reverse Fan Blade for Power Supply Shroud /Bottom plate of Case for Air Intakes!
⚡ Infinity mirror look all around.
⚡ 120mm full function ARGB PWM fan. The intelligent temperature controls the speed at 800~1600±10% RPM, by linking to the motherboard PWM 4pin socket, so the fan speed auto controlled and keeps the fans quiet.
⚡ Embedded magnetic Fluid Dynamic Bearing to provide stability, durability, and longevity.
⚡ 24 LEDs in each fan,Center 8pcs, Outer ringg 16pcs.
⚡【Reverse Blade of Fan】 Reverse Fan Blade for Power Supply Shroud /Bottom plate of Case for Air Intakes, to additional increase airflow from bottom to vertical chassis design type.