ARGB Force

GameMax Infinity multi-ARGB fan GMX-12ARGB-L, with Inner and Outer light, and center with infinity depth light effects.
PWM 4pin link to motherboard Chassis fan socket, for auto speed control, and with additional 4pin male connector for linking more fans in Series connection.
ARGB 3pin Male/Female connector, supports standard addressable RGB leds ,Asus Aura and it can extend to link more fans via the series connection.
Anti-noise design by optimized fan blade and there are rubber gaskets on the fan corner

GameMax big bowl fan GMX-12-RBB side luminous band GameMax- playability< br/> The fan blade can be disassembled, which is convenient for dust removal --- functional< br/> The bowl-shaped design has large wind pressure; the Suspended fan blade design, with large air volume 58.8cfm (the fan blade is larger than the traditional aperture fan), and the air pressure is 2.18
The sickle design matches the suspended fan blade, which increases the air intake volume from the side. The traditional fan can only supply air from the front, which increases the air intake volume
Optimize use big motor has lower dynamic balance, longer service life, and quieter sound
The ultra-thin design is 20% lower than the traditional fan. The cold exhaust installed with our fan can be compatible with the high vest memory module in the market without interference< br/> The expandable fan cover is practical and beautiful, which can better conform to the spirit of DIY and improve the overall effect after installation

Brand new for 2022 FN-12Rainbow-Q-Infinity Full White, ARGB 12cm Fan, it is outer quad ring light along with infinity light effect in the Centre of fan, and a hydraulic bearing silent fan
Allowing for a quiet operation during use with a noise level of approx. 22dB(A), it comes with 5V Addressable 3pin Header and the fan is powered by a regular 3pin connector. It comes with various lighting effects when it is synced using an AURA connector, creating a unique look. The rubber gasket increases the reduction of vibration from the fans movement.
With the even increasing need for the cooling of computer components, due to the increased performance, the FN-12RAINBOW-Q-Infinity gives user an affordable solution, the built in LEDs allow you with the customization of your computer system via AURA SYNC or HUB controller, The Rainbow is an ideal upgrade to help cool various components within your computer, simply attach to a suitable CPU cooler to the chassis or to replace the fans on your water-cooling radiator.
In line with the GameMax ethos this case offers style, performance and the ultimate experience.

Brand new for 2022 FN-12Rainbow-Q-Infinity ARGB 12cm Fan, it is outer quad ring light along with infinity light effect in the centre of fan, and a hydraulic bearing silent fan
Allowing for a quiet operation during use with a noise level of approx. 22dB(A), it comes with 5V Addressable 3pin Header and the fan is powered by a regular 3pin connector. It comes with various lighting effects when it is synced using an AURA connector, creating a unique look. The rubber gasket increases the reduction of vibration from the fans movement.
With the even increasing need for the cooling of computer components, due to the increased performance, the FN-12RAINBOW-Q-Infinity gives user an affordable solution, the built in LEDs allow you with the customisation of your computer system via AURA SYNC or HUB controller, The Rainbow is an ideal upgrade to help cool various components within your computer, simply attach to a suitable CPU cooler to the chassis or to replace the fans on your water-cooling radiator.
In line with the GameMax ethos this case offers style, performance and the ultimate experience.

Brand new for 2022 FN-12Rainbow-C9-Infinity ARGB 2cm Fan, it is with infinity light effect in the center of the fan, and a hydraulic bearing silent fan allowing for a quiet operation during use with a noise level of approx. 25dB(A), it comes with a 5V Addressable 3pin Header and the fan is powered by a regular 3pin connector. It comes with various lighting effects when it is synced using an AURA connector, creating a unique look. The rubber gasket increases the reduction of vibration from the fan's movement.
With the ever-increasing need for the cooling of computer components, due to the increased performance, the FN-12RAINBOW-Infinity gives the user an affordable solution, the built-in LEDs allow you the customization of your computer system via AURA SYNC or HUB controller, The Rainbow is an ideal upgrade to help cool various components within your computer, simply attach to a suitable CPU cooler to the chassis or to replace the fans on your water-cooling radiator.
In line with the GameMax ethos, this case offers style, performance, and the ultimate experience.

1. White Blade and Frame,Dual Ring Big bowl ARGB fan
2. Silent and with unique design
3. The fan blade can be disassembled for easy cleaning of dust
4. Bowl design Wind pressure is large; suspended fan blade design, large air volume (fan blades are larger than traditional aperture fans)
5. The sickle type design is matched with the floating fan blade, which increases the air intake side and can also enter the wind. The traditional fan can only enter the wind from the front. Refer to the edge of the “Owl” fan frame for improvement (GameMax patents)
6. Ultra-thin design, 20% lower than conventional fans
7. Support ASUS/MSI/Gigabyte RGB-SYNC mode (to be together with correct controller)

1. Dual Ring Big bowl ARGB fan
2. Silent and with unique design
3. The fan blade can be disassembled for easy cleaning of dust
4. Bowl design Wind pressure is large; suspended fan blade design, large air volume (fan blades are larger than traditional aperture fans)
5. The sickle type design is matched with the floating fan blade, which increases the air intake side and can also enter the wind. The traditional fan can only enter the wind from the front. Refer to the edge of the “Owl” fan frame for improvement (GameMax patents)
6. Ultra-thin design, 20% lower than conventional fans
7. Support ASUS/MSI/Gigabyte RGB-SYNC mode (to be together with correct controller)

1. Centre inner ARGB light Big bowl ARGB fan
2. Silent and with unique design
3. The fan blade can be disassembled for easy cleaning of dust
4. Bowl design Wind pressure is large; suspended fan blade design, large air volume (fan blades are larger than traditional aperture fans)
5. The sickle type design is matched with the floating fan blade, which increases the air intake side and can also enter the wind. The traditional fan can only enter the wind from the front. Refer to the edge of the “Owl” fan frame for improvement (GameMax patents)
6. Ultra-thin design, 20% lower than conventional fans
7. Support ASUS/MSI/Gigabyte RGB-SYNC mode (to be together with correct controller)

Brand new for 2019 GameMax FN-12RAINBOW-N are proud to introduce the GameMax FN-12RAINBOW-N Rainbow Dual-Ring 12cm Fan, it is an hydraulic bearing silent fan allowing for a quiet operation during use with a noise level of approx. 25dB(A), it comes with 5V Addressable 3pin Header and the fan is powered by a regular 3pin connector. It comes with various lighting effects when it is synced using an AURA connector, creating a unique look. The rubber gasket increases the reduction of vibration from the fans movement.
With the even increasing need for the cooling of computer components, due to the increased performance, the FN-12RAINBOW-N gives user an affordable solution, the built in LEDs allow you with the customisation of your computer system via AURA SYNC or HUB controller, The Rainbow is an ideal upgrade to help cool various components within your computer, simply attach to a suitable CPU cooler to the chassis or to replace the fans on your water-cooling radiator.
In line with the GameMax ethos this case offers style, performance and the ultimate experience.

FN-14Rainbow-C9 14cm RGB Turing Fan, Gorgeous Light A-RGB Fan, Dreamy colorful effect, lighting spreads from the center to all of the white fan blades, giving smooth and pertect lighting.
⚡【Fascinating RGB effects】 Colorful lighting, giving your build the texture you crave.
⚡【High-qualityhydraulic bearing】Low working noise, long product lifetime.
⚡【Anti-vibration pads】Unique textured anti-vibration pads ensure stable everyday PC usage.
⚡【9 blade fan】Equipped with the best aerodynamic designed fan blades.
⚡【Special Processed Fan Blades】Smoothened blade surface, lowers windage significantly.

FN-Rainbow-C9 RGB Turing Fan, Gorgeous Light A-RGB Fan, Dreamy colorful effect, lighting spreads from the center to all of the white fan blades, giving smooth and pertect lighting.
⚡【Fascinating RGB effects】 Colorful lighting, giving your build the texture you crave.
⚡【High-qualityhydraulic bearing】Low working noise, long product lifetime.
⚡【Anti-vibration pads】Unique textured anti-vibration pads ensure stable everyday PC usage.
⚡【9 blade fan】Equipped with the best aerodynamic designed fan blades.
⚡【Special Processed Fan Blades】Smoothened blade surface, lowers windage significantly.

Aura ready support
Centre light design
ARGB 5V addressable leds
3+4pin morex Fan powered
Aura 3pin header M/F with protection socket
Silent fan designed
Rubber feet for noise killing

Brand new for 2020 GameMax FN-12RAINBOW-D are proud to introduce the GameMax FN-12RAINBOW-D Rainbow Dual-Ring 12cm Fan, it is an hydraulic bearing silent fan allowing for a quiet operation during use with a noise level of approx. 25dB(A), it comes with 5V Addressable 3pin Header and the fan is powered by a regular 3pin connector. It comes with various lighting effects when it is synced using an AURA connector, creating a unique look. The rubber gasket increases the reduction of vibration from the fans movement.
With the even increasing need for the cooling of computer components, due to the increased performance, the FN-12RAINBOW-D gives user an affordable solution, the built in LEDs allow you with the customisation of your computer system via AURA SYNC or HUB controller

GameMax Haze Rainbow ARGB 12cm Fan, it is an hydraulic bearing silent fan, allowing for a quiet operation during use with a noise level of approx. 25dB(A), it comes with a 5V Addressable 3pin AURA M/F connector and the fan is powered by a 3pin and 4pin morex power connector.
There is 15pcs Addressable ARGB leds on the frame of Fan, It comes with various lighting effects when it is synced using an ARGB HUB or Mobo Aura header, creating a unique look. The noise killing gasket increases the reduction of vibration from the fans movement.
In line with the GameMax ethos this case offers style, performance and the ultimate experience.

20cm ARGB Fan
3pin Fan powered
Aura 5V led 3PIN header
Dual ring light
Noise killing gasket